Run the following command, replacing /dev/disk/by-id/usb- My_flash_drive with your drive, e.g. This method is recommended due to its simplicity and universal availability, since these tools are part of coreutils (pulled in by the base meta package).įind out the name of your USB drive with ls -l /dev/disk/by-id/usb-* and check with lsblk to make sure that it is not mounted. In GNU/Linux Using basic command line utilities This means the ISO cannot be written to a 4Kn Advanced Format drive using this method. Make a note of the disk number of the USB drive.Note: If, instead of a USB flash drive or an SD card, you want to write the ISO to a hard disk drive or a solid state drive, make sure the drive's logical sector size is not larger than 2048 bytes (the ISO 9660 sector size) and aligns to it. You'll probably be able to spot it based on the drive's capacity. ![]() One of the drives listed will be your USB drive. Here, call up a list of disks attached to your PC. This will open in a new command prompt window. ![]() In the black command prompt window, open the disk partitioning tool with the command: diskpart Right-click the first result and select Run as administrator. On Windows 10, click Start then type "command". ![]() Of course, you need to be able to authenticate as the administrator on the PC you're using. You should also insert the Windows 7 installation DVD.Ĭlick Start > All Programs > Accessories and right-click on Command Prompt. To start, insert your USB flash drive in your main PC-the one with the optical drive. However, they're almost the same whatever operating system you're using, including Windows 10 or even 11. ![]() The following steps can be completed on a Windows 7 computer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |